arcade home | 1 | 2 | 3 | 4 | 5 | 6 | contact  


Happ ran another sale on monitors and my old G07 was starting to flake out, so a fresh 19" Happ VP2 monitor will be installed.

Since the VP2 monitor has a grounded (3-prong) plug and the G07 didn't, I ran a clean ground from the transformer housing. It's connected with a ring adapter, just like the other original wires. I also added a fresh "big blue" for preventative maintenance.


The new ground wire was zip-tied to the original harness.


I replaced the original 2-position Molex connector with a 3-position part. This will connect directly to the monitor's power cord and give switched power from the game.


Up and running (with Millipede)


Up and running (with Millipede)